Product attributes
Ocado Price Promise
Shop all Gorilla Glue
Product Information
Gorilla Super Glue Brush & Nozzle features a precision tip nozzle and fine bristle brush, perfect for controlled application on any project. Developed for repairs in an instant, Gorilla Super Glue dries in 10 – 45 seconds and is formulated for increased impact resistance.
Gorilla Super Glue Brush & Nozzle is Impact-Tough™, meaning it’s formulated for increased impact resistance to handle wear and tear. An anti-clog cap with a metal pin inside ensures an airtight seal for maximum reusability. It’s Gorilla tough, every time.
Gorilla Super Glue Brush & Nozzle is Impact-Tough™, meaning it’s formulated for increased impact resistance to handle wear and tear. An anti-clog cap with a metal pin inside ensures an airtight seal for maximum reusability. It’s Gorilla tough, every time.
Features
Two Ways to Dispense - Fine bristle brush for controlled coverage with less mess & precision nozzle for quick, easy dispensing., Impact Tough™ - Formulated for impact resistance and strength., Fast Setting - Dries in just 10-45 seconds, with no gripping required., Bonds - Metal, wood, ceramic, paper, rubber and more!
Further description
Gorilla Super Glue Brush & Nozzle features a precision tip nozzle and fine bristle brush, perfect for controlled application on any project.
Country of origin
United States
Preparation and Usage
Directions
Prepare
All surfaces should be clean and dry.
1 Apply
To use nozzle, unscrew upper cap and remove. To use brush, unscrew full cap and wipe the brush on the inner rim of the bottle to remove excess glue. Apply a small amount of Gorilla Super Glue to one surface. Use one drop of glue per 6.5cm². Excess glue can cause delayed or failed bond.
2 Press
Press the two surfaces together for 10-45 seconds. Set time can vary based on amount of glue and type of surface. Full cure achieved in 24 hours.
After each use, wipe off any glue that remains on the neck or nozzle of the bottle with a dry cloth and replace cap tightly. Ensure no debris gets into the bottle.
Only 1 drop per 6.5cm² recommended
Prepare
All surfaces should be clean and dry.
1 Apply
To use nozzle, unscrew upper cap and remove. To use brush, unscrew full cap and wipe the brush on the inner rim of the bottle to remove excess glue. Apply a small amount of Gorilla Super Glue to one surface. Use one drop of glue per 6.5cm². Excess glue can cause delayed or failed bond.
2 Press
Press the two surfaces together for 10-45 seconds. Set time can vary based on amount of glue and type of surface. Full cure achieved in 24 hours.
After each use, wipe off any glue that remains on the neck or nozzle of the bottle with a dry cloth and replace cap tightly. Ensure no debris gets into the bottle.
Only 1 drop per 6.5cm² recommended
Package type
Blister Pack
Other Information
Storage:
Store in a cool, dry place, away from children and animals.
Safety Warning:
Contains: Ethyl 2-cyanoacrylate
WARNING. Causes skin irritation. Causes serious eye irritation. May cause respiratory irritation. If medical advice is needed, have product container or label at hand. Avoid breathing vapours. Wear protective gloves/protective clothing/eye protection/face protection. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. Dispose of contents in accordance with local, state or national legislation.
Cyanoacrylate. Danger. Bonds skin and eyes in seconds. Keep out of the reach of children. Contains: 1,4-dihydroxybenzene. May produce an allergic reaction.
Additional Information:
©2023 Gorilla Glue Europe Ltd.
Store in a cool, dry place, away from children and animals.
Safety Warning:
Contains: Ethyl 2-cyanoacrylate
WARNING. Causes skin irritation. Causes serious eye irritation. May cause respiratory irritation. If medical advice is needed, have product container or label at hand. Avoid breathing vapours. Wear protective gloves/protective clothing/eye protection/face protection. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. Dispose of contents in accordance with local, state or national legislation.
Cyanoacrylate. Danger. Bonds skin and eyes in seconds. Keep out of the reach of children. Contains: 1,4-dihydroxybenzene. May produce an allergic reaction.
Additional Information:
©2023 Gorilla Glue Europe Ltd.
Brand
Gorilla Glue
Brand details
The Gorilla Glue Company has been offering industry leading adhesives for over two decades and currently serves the UK and Europe from offices based in Chorley, Lancashire. The original Gorilla Glue formula was first discovered being used in Indonesia on teak furniture, but consumers soon found it to be incredibly versatile and demand soared. Gorilla’s ever-expanding range of adhesives are designed to be TOUGH, and now include Super Glues, Wood Glue, Specialist Tapes, Epoxies, Sealants and more.
Manufacturer
Gorilla Glue Europe Ltd.,
PO Box 663,
Chorley,
PR6 6PU,
UK.
EU: GG Brands Netherlands BV,
Lichttoren 32,
5611 BJ,
Eindhoven,
Netherlands.
PO Box 663,
Chorley,
PR6 6PU,
UK.
EU: GG Brands Netherlands BV,
Lichttoren 32,
5611 BJ,
Eindhoven,
Netherlands.
Return to Address
Find more at gorillaglue.com
Gorilla Glue Europe Ltd.,
PO Box 663,
Chorley,
PR6 6PU,
UK.
Tel (UK): +44 (0)843 507 1200
Tel (EU): +31 85 064 4029
Gorilla Glue Europe Ltd.,
PO Box 663,
Chorley,
PR6 6PU,
UK.
Tel (UK): +44 (0)843 507 1200
Tel (EU): +31 85 064 4029
Manufacturer marketing
The Gorilla Glue Company is family-owned and operated and prides itself on its family atmosphere and dedication to providing a healthy work culture centered on family values. We build brands people love with products we believe in alongside people we care about – that’s the Gorilla Way.
Customer reviews
Overall ratings
Average 1.6 out of 5, based on 9 reviews.Breakdown of ratings
Customer reviews (0)
Customer reviews, 0 total.
Sort