Gorilla Contact Adhesive Clear 75g 75g
Ocado Price Promise
Product information
Gorilla Contact Adhesive is a flexible, fast-setting, crystal clear glue that creates a strong, permanent bond. Being paintable and waterproof makes it great for projects both inside and out! So, no worries if it ends up in the washing machine or out in the rain.
Holds in Seconds, Incredibly Strong, 100% Waterproof, No-run formula, Repositionable, Permanent Bond, Flexible, Paintable: when fully cured
Country of Origin
United States
Preparation and Usage
Prepare
All surfaces should be clean and dry.
1 Apply
Squeeze tube gently at crimped end to dispense product slowly through nozzle. Do not apply too much pressure to tube. Apply adhesive to each surface to be bonded. Best results achieved when applied at room temperature (10°C to 32°C).
2 Position
Allow adhesive to partially dry.
a. For Maximum Bond Strength: Wait approximately 2 minutes before joining surfaces.
b. For Repositionable Bonds: Wait approximately 1 minute before joining surfaces. Repositionable for 2-4 minutes depending on surface type.
3 Press
Press surfaces firmly together. Allow a minimum of 24 hours for full cure. Cure time may increase with lower temperatures and/or when used on non-porous surfaces.
Clean-up: Wipe uncured adhesive with a dry cloth and clean with acetone, isopropyl alcohol, or citrus-based solvents according to manufacturer's instructions. Cured adhesive may be removed by scraping from surface.
All surfaces should be clean and dry.
1 Apply
Squeeze tube gently at crimped end to dispense product slowly through nozzle. Do not apply too much pressure to tube. Apply adhesive to each surface to be bonded. Best results achieved when applied at room temperature (10°C to 32°C).
2 Position
Allow adhesive to partially dry.
a. For Maximum Bond Strength: Wait approximately 2 minutes before joining surfaces.
b. For Repositionable Bonds: Wait approximately 1 minute before joining surfaces. Repositionable for 2-4 minutes depending on surface type.
3 Press
Press surfaces firmly together. Allow a minimum of 24 hours for full cure. Cure time may increase with lower temperatures and/or when used on non-porous surfaces.
Clean-up: Wipe uncured adhesive with a dry cloth and clean with acetone, isopropyl alcohol, or citrus-based solvents according to manufacturer's instructions. Cured adhesive may be removed by scraping from surface.
Package Type
Blister Pack
Other Information
Storage:
After each use, wipe nozzle clean with a dry cloth and replace cap tightly. Store in a cool, dry place away from children and animals.
Safety Warning:
Note: Not for use on food contact surfaces. Do not dry clean. May cause damage to finished surfaces.
Gorilla Contact Adhesive
Contains: Xylene; Ethylbenzene
DANGER. Highly flammable liquid and vapour. Causes skin irritation. If medical advice is needed, have product container or label at hand. Keep out of reach of children. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Wear protective gloves/protective clothing/eye protection/face protection. In case of fire: Use water spray, foam, dry powder or CO₂ to extinguish. Dispose of contents in accordance with local, state or national legislation.
Contains: (2-(2H-Benzotriazol-2-YL)-P-Cresol, Trimethoxyvinylsilane).
May produce an allergic reaction.
Additional Information:
©2022 Gorilla Glue Europe
After each use, wipe nozzle clean with a dry cloth and replace cap tightly. Store in a cool, dry place away from children and animals.
Safety Warning:
Note: Not for use on food contact surfaces. Do not dry clean. May cause damage to finished surfaces.
Gorilla Contact Adhesive
Contains: Xylene; Ethylbenzene
DANGER. Highly flammable liquid and vapour. Causes skin irritation. If medical advice is needed, have product container or label at hand. Keep out of reach of children. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Wear protective gloves/protective clothing/eye protection/face protection. In case of fire: Use water spray, foam, dry powder or CO₂ to extinguish. Dispose of contents in accordance with local, state or national legislation.
Contains: (2-(2H-Benzotriazol-2-YL)-P-Cresol, Trimethoxyvinylsilane).
May produce an allergic reaction.
Additional Information:
©2022 Gorilla Glue Europe
Brand
Gorilla
For the toughest jobs on planet earth®
Find out more at gorillaglue.com
Find out more at gorillaglue.com
Manufacturer
Gorilla Glue Europe Ltd.,
PO Box 663,
Chorley,
PR6 6PU,
UK.
PO Box 663,
Chorley,
PR6 6PU,
UK.
Return To Address
Gorilla Glue Europe Ltd.,
PO Box 663,
Chorley,
PR6 6PU,
UK.
+44 (0)843 507 1200
PO Box 663,
Chorley,
PR6 6PU,
UK.
+44 (0)843 507 1200
Ingredients
Contains: (2-(2H-Benzotriazol-2-YL)-P-Cresol
Categories
Ratings and reviews
1.0
0
0
0
0
1
1
Customers rated this product
0%
Customers would recommend this product
Customer reviews (1)
Worst glue ever
First time using his glue, it's useless unless you have a lot of time to hold things together while this sets. It drips out of the tube, it's not particularly strong. Oh dear.
Was this helpful? (0) (1)